Set tapiau a marw HSS 40pcs
Nodweddion
1. Dur Cyflymder Uchel (HSS) Adeiladu
2. Ystod eang o feintiau
3. Gall y pecyn gynnwys gwahanol fathau o dapiau fel taprau, plygiau a thapiau gwaelod i fodloni gofynion edafu amrywiol.
4. gymwysadwy yn marw
5. Achos Storio.
6. Trywydd Trywydd
7. Mae'r pecyn hwn yn gweithio gydag amrywiaeth o ddeunyddiau, gan gynnwys dur, alwminiwm, pres, a metelau eraill.
8. Cydweddoldeb
9. Ategolion ychwanegol
Yn gyffredinol, mae set tap a marw HSS 40-darn yn darparu dewis eang o offer ar gyfer torri edafedd mewnol ac allanol, gan ei wneud yn ychwanegiad gwerthfawr i weithdai, garejys modurol ac amgylcheddau diwydiannol.
SIOE CYNNYRCH
ffatri
manylebau
| Eitemau | Manyleb | Safonol |
| TAPS | Tapiau llaw ffliwiog syth | ISO |
| DIN352 | ||
| DIN351 BSW/UNC/UNF | ||
| DIN2181 | ||
| Tapiau peiriant ffliwiog syth | DIN371/M | |
| DIN371/W/BSF | ||
| DIN371/UNC/UNF | ||
| DIN374/MF | ||
| DIN374/UNF | ||
| DIN376/M | ||
| DIN376/UNC | ||
| DIN376W/BSF | ||
| DIN2181/UNC/UNF | ||
| DIN2181/BSW | ||
| DIN2183/UNC/UNF | ||
| DIN2183/BSW | ||
| Tapiau ffliwiog troellog | ISO | |
| DIN371/M | ||
| DIN371/W/BSF | ||
| DIN371/UNC/UNF | ||
| DIN374/MF | ||
| DIN374/UNF | ||
| DIN376/M | ||
| DIN376/UNC | ||
| DIN376W/BSF | ||
| Tapiau pigfain troellog | ISO | |
| DIN371/M | ||
| DIN371/W/BSF | ||
| DIN371/UNC/UNF | ||
| DIN374/MF | ||
| DIN374/UNF | ||
| DIN376/M | ||
| DIN376/UNC | ||
| DIN376W/BSF | ||
| Tap rholio / Ffurfio tap | ||
| Tapiau edau pibell | G/NPT/NPS/PT | |
| DIN5157 | ||
| DIN5156 | ||
| DIN353 | ||
| Tapiau cnau | DIN357 | |
| Dril a thap cyfun | ||
| Tapiau a set marw |
| Maint | L | Lc | d | k | twll gwaelod | |||||
| M2*0.4 | 40.00 | 12.00 | 3.00 | 2.50 | 1.60 | |||||
| M2.5*0.45 | 44.00 | 14.00 | 3.00 | 2.50 | 2.10 | |||||
| M3*0.5 | 46.00 | 11.00 | 4.00 | 3.20 | 2.50 | |||||
| M4*0.7 | 52.00 | 13.00 | 5.00 | 4.00 | 3.30 | |||||
| M5*0.8 | 60.00 | 16.00 | 5.50 | 4.50 | 4.20 | |||||
| M6*1.0 | 62.00 | 19.00 | 6.00 | 4.50 | 5.00 | |||||
| M8*1.25 | 70.00 | 22.00 | 6.20 | 5.00 | 6.80 | |||||
| M10*1.5 | 75.00 | 24.00 | 7.00 | 5.50 | 8.50 | |||||
| M12*1.75 | 82.00 | 29.00 | 8.50 | 6.50 | 10.30 | |||||
Ysgrifennwch eich neges yma a'i hanfon atom
